Titan Telescoping Flagpole Replacement Parts

Get the complete replacement set for your Titan Telescoping Flagpole. Let you replace all the parts for your Titan Telescoping Flagpole.

Recommended when replacing the interlocking sleeves for the Titan Telescoping Flagpole.

Lexan plastic.  Inside diameter is 1 3/4″.

Anodized aluminum ball. 3″ Diameter. The replacement screws for these are  1/4″ diameter x 1/2″ long; 28 Threads Per Inch.   

ABS plastic tube 18″ in length.  Will fit inside the 3″ ground sleeve should you ever decide to downsize your Titan Telescoping Flagpole from a 3″ base to a 2.5″ base.

Colors White Silver Light Bronze Bronze/Black

ABS plastic sleeve 12″ in length for flagpole mounts.   Converts inside diameter of any of our flagpole mounts (or wheel stand) from 3.0″ to 2.5″ to fit a 15′ or LT Titan Telescoping Flagpole. If you need a reducer...

This is used primarily for RV camping or even tailgating in a parking lot! Powder coated aluminum “Hitch Mount”. The end that fits into the receiver is 15″ long and is a 2″x2″ square (outside measurement). The hole for the...

Lexan plastic ring.  Inside diameter is 1 3/4″. Colors White Silver Light Bronze Bronze/Black

Lexan plastic.  Inside diameter is 2 1/4″.

Lexan plastic material.  Outside diameter of Top Cap is 1 1/2″.  Inside diameter of Retainer Ring is 1 3/4″.  If you purchased your Titan Telescoping Flagpole prior to 2010, you will also need to replace the Top (small) Swivel...

The Titan Telescoping Flagpole Swivel Ring Set replaces all the swivel rings on your Titan Telescoping Flagpole. Inside diameter of the small and double swivel rings is 1 3/4″.  Inside diameter of large swivel ring is 2 1/4″...